Repariere deine Sachen Community Shop

Änderungen an Schritt Nr. 8

Bearbeitet von Rachel Murphy –

Bearbeitung genehmigt von Rachel Murphy

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Using the pliers, cut the pin in the hip section to the appropriate length to fit into the hole made from Step 6.
-[* icon_caution] The needle will go flying, so direct it away from your face and other precious objects.
-[* icon_note] Cut longer than you think you need first, and test the ball joint to see if you need to cut more.
+[* black] Test the needle length by fitting the ball joint pieces together. The needle should be completely covered.
+[* icon_caution] The needle will go flying when you cut it, so direct it away from your face and other precious objects.
OSZAR »